7.3L Power Stroke Fuel Pressure Test Port With Adapters (1999 - 2003 Engines)

Fuel Pressure Test Port for 1999 to 2003 7.3L Power Stroke Fuel Bowls

The fuel bowl on a 1999 to 2003 Power Stroke engine is not factory equipped with a fuel pressure test port, but there are two plugged holes located at the rear of the housing where pressure can be tested (see images). This kit includes a common 1/4 inch flare fuel pressure test port and the required adapters to secure it in an easily accessible position at the rear of the fuel bowl.

Shrader valve features a fuel resistance Viton seal and screw on dust cap to keep the port clean when not in use. 1/4 inch flare is the modern standard for fuel system test equipment and thus this port is compatible with most common gauge setups.

Includes (1) fuel test port, (1) straight adapter, and (1) adjustable elbow adapter. Can easily be installed permanently or used and removed after use. The straight adapter acts as a standoff and eliminates the need to grind the fuel bowl to make room for the elbow.

FEATURES

• Easily test fuel pressure on a 7.3L Power Stroke
• Protective screw cap keeps test port free of dust & debris
• Pressure test valve Made in USA

APPLICATIONS

1999 - 2003 Ford F-250, F-350, F-450, F-550 Super Duty
2000 - 2003 Ford Excursion
2000 - 2003 Econoline E-350, E-450, E-550
2000 - 2003 Ford F-650, F-750

INSTALLATION NOTES

Remove desired plug from fuel bowl, then install straight adapter followed by adjustable elbow adapter. Tighten jam nut on elbow once appropriate thread depth and fitting position are achieved. Install test port into top of elbow using appropriate thread sealant; recommend Loctite 545 or Motorcraft TA-24.

Both adapters seal with o-rings and do not require much torque to achieve a positive seal. The test port is an NPT thread; support the elbow while tightening down to prevent cracking the fuel filter housing.

ADDITIONAL PRODUCT DETAILS